measuring room

英 [ˈmeʒərɪŋ ruːm] 美 [ˈmeʒərɪŋ ruːm]

网络  测量室

医学



双语例句

  1. It also makes works of measuring and calculation very convenient when predicts the impaction of noise which reverberates in a room and penetrates out of windows.
    而对于室内混响窗外传声的声影响预测,采用该方法也会使测量和计算变得十分简洁方便。
  2. Measuring the room yields the result that my room is a strange pentagon.
    丈量房间的结果是我的房间是奇怪的五边形。
  3. Besides, the company had set up complete detecting techniques, physical and chemical lab, mechanics lab and measuring room.
    检测手段齐全,设有理化实验室,力学实验室,计量室。
  4. An injection mould for measuring room of gas meter was developed.
    针对煤气表计量室这一热塑性材料复杂塑件,设计了相应的注射模。
  5. Design and Study on the measuring room for internal combustion engine noise
    内燃机噪声测试室的设计与研究
  6. An equivalence standard of distribution function models of gap state density is obtained by measuring the low frequency capacitance of Metal/ a-Si in room temperature.
    并通过测量室温时低频势垒电容,得到了隙态密度分布函数模型等价的标准。
  7. Using digital measuring device, in 2-coat shielding room, quantity-phase information of discharge current of 4 models are obtained.
    使用数字化测量装置,在双层屏蔽试验室内,取得了各种模型放电的放电量一相位信息。
  8. This work make improvements to traditionally static high pressure method of measuring strength-radial pressure distribution with diamond anvil cell loading, including taking no gasket, straightly loading on the surface of sample with shell shape and in situ measuring thickness of sample under room temperature and high pressure.
    对测量材料屈服强度的传统技术-DAC加载径向压力分布法做如下改进:不加封垫,以金刚石压砧直接加压于片状样品表面,室温高压下原位测量样品厚度。
  9. Design of Temperature Virtual Measuring System for Room Temperature of Soil Bin
    土槽室温虚拟测试系统设计
  10. Exploration of Methods for Measuring Performance of Room Air Cleaners
    空气净化器性能试验方法的探讨
  11. By measuring and calculating the neutron spectra in exposure room of Pulsed Reactor, the main ways to improve the accuracy of the solution spectra with SAND-II have summarized.
    通过对脉冲反应堆辐照腔中子能谱的测量计算,总结了提高SAND-II解谱准确性的主要途径。
  12. Methods The sound level and frequency were measured according to the corresponding health criterion and measuring method at big production equipment, crush room, control room and workshop.
    方法是根据有关卫生标准及检测方法对生产设备、休息室、控制室等作业场所进行声强和频谱的测量。
  13. A new method is discussed that a standard laser is used in the optical arrangement of the SIOM-0l wavemeter for measuring, A single point calibration can be made at anytime, it surmounts the measuring error made by the change of room temperature.
    论述了SIOM-01激光波长计以一种新颖的将标准激光引入测量光路的方法,随时对仪器参数实行单点标定,克服了由环境温度变化引进的测量误差。
  14. Device for Measuring Compressive Strength of Bonded Magnet from Room Temperature to 300 ℃
    室温~300℃粘结磁体抗压强度测量装置
  15. A mean for measuring the surface sound energy diffusion coefficient in a room
    室内界面声能扩散系数测量方法
  16. On the basis of acoustic research, the design essentials of the measuring room for internal combustion engine noise are presented, and the common possibility of a noise measurement room and a trial run room is demonstrated.
    在声学研究分析的基础上,阐述了内燃机噪声测试室的工程设计要点,论证了噪声测试室与试车室共用的可行性。
  17. The measuring method& result of internal and external flow fields for outdoor unit is introduced by using hot wire anemometer and differential manometer measuring room airconditioner.
    介绍了采用热线风速仪和微压差压力计测量分体式房间空调器室外机组内外流场的方法和流场测试结果。
  18. Calculating results show that it is available to study the tiny particle diffusion by means of measuring and analyzing the room airflow movement in an air conditioning and cleaning room.
    计算结果表明,在空调净化房间通过测量分析气流的运动规律来研究气流中微小粒子的扩散规律是可行的。
  19. In the paper, a traditional setting of measuring TSC is improved by ameliorating sample room and assembling liquid nitrogen cooled system, which can analyze exactly sample in detail.
    本文通过改进样品室、增加液氮冷却系统,对传统热激电流测量装置进行了完善,使其能对样品进行更详细地分析。
  20. In measuring parameters of room acoustics, different signal processing methods will lead to different results.
    在室内声学参量的测量中,不同的信号处理方法将会使计算结果产生偏差。
  21. Applications of Bayes estimation to the measuring of aerial baseline at EDM testing room
    Bayes估计在EDM检定室空中基线测定中的应用
  22. We used anemometers and copper constantan thermocouple respectively to measure velocities and temperatures of all measuring points under various air volumes within the room.
    用热线风速仪、铜&康铜热电偶分别测量出不同送风量下的室内各个测点的速度和温度。
  23. In measuring the photovoltage spectra at room temperature in different vacua, it is found that the photovoltage of AlGaAs/ GaAs multiple quantum wells is very sensitive to vacua.
    通过测量在不同真空度中的室温光电压谱,发现AlGaAs/GaAs多量子阱的光电压对真空度很敏感。
  24. The scattering by air and the walls of the measuring room was determined by both experiment and Monte Carlo simulation.
    对裂变碎片探测器和中子探测器之间空气层及测量室的墙壁上散射的影响,用飞行时间方法进行了测量,也用MonteCarlo方法进行了计算,并对用两种方法得到的结果进行了比较。
  25. The oocyst was shown pyriform in shape, rather broad, measuring 27. 38 × 19. 97 μ m. At room temp.
    卵囊呈宽梨形,平均大小为27.38×19.97μm。
  26. The principle and some demands of measurement of nuclear ionization room are narrated. The constitute of measuring system of stability of nuclear ionization room, how to realize the system with PC and other devices and some programming methods on Visual Basic are detailed.
    叙述了核子电离室原理及其测试要求,较详细介绍了核子电离室稳定性测试系统的组成,以及采用PC机的硬件实现和使用VB的软件编程方法。
  27. By measuring germination percentage, germination rate, leaf area and so on, 16 indices was researched in room and out.
    通过室内发芽试验和室外盆栽试验,在总结前人成果的基础上,测定了与抗旱性有关的芽率、芽势和叶面积等16项鉴定指标。
  28. The problems in measuring the two grade thrust produced by single room double thrust rocket engine and dynamic force are analyzed, and the new double range measuring force sensor is designed which can be used to measure the two grade thrust of the rocket engine.
    分析了单室双推力火箭发动机两级推力及动态力测试中存在的问题,并由此设计了可兼顾单室双推力火箭发动机两级推力测试的新型双量程测力传感器。
  29. An experimental set-up using F-P etalon for measuring the output spectrum of the branch selected CO laser at room temperature is given. The influences of the discharge current, pressure and grating tuning angle on the output spectrum are studied.
    利用红外F&P标准具测量了室温选支CO激光器的输出光谱,研究了放电电流、气压、光栅调谐角对输出谱线的影响。
  30. Gear measurement technology in measuring room is well-developed, but how to inspect the gears fast in workshop is a problem.
    虽然在计量室条件下齿轮测量是成熟的技术,但在生产现场的大批量检测中,如何快速获取齿轮的精度信息却是个难题。